Oticon Corda 2 Thin Tubing - 5 Tubes
This is a pack of 5 tubes. Domes are sold separately
How to work out what to order:
At the end of the tube that goes into the ear you will see a number. Printed in blue for the left ear, and red for the right ear. You may see number like this: 0-0.9 or 1-0.9 or 2-0.9 or 3-0.9. Ignore the 0.9 part and look at the number that comes before it. Our photos show a left size 0 example.
This number between 0 and 3 is the size you need to order.
Corda miniFIT thin tubes (which have a different tip design) can also fit in the same housing as Corda 2 tubings and are interchangeable with them – but they must use the newer Oticon miniFIT Domes. If you replace a Corda2 tubing with a Corda miniFit tubing, the acoustic properties are different and the hearing aid may sound a bit different.
Please be very careful to use Oticon Corda domes with Oticon Corda 2 thin tubes and Oticon miniFIT domes with Oticon Corda miniFIT thin tubes. The ends of these two types of tubing are different.
Please read the following guidance and recommendations from Oticon regarding their accessories:
- Each of the Oticon range of tubes and domes has different acoustic properties and your hearing aid will have been specifically set up for use with a particular type.
- A dome should only ever be attached once – these are push fit – with a friction hold – if a dome ever looks as if it is loose or becomes detached a new dome should be applied.
- Only select the dome and tubing type/size that you currently have. Your ear has been measured for size, whilst your hearing aid has been acoustically programmed to match the dome selection.
- If you're not sure which ones you need, please dont guess, ask before placing your order.
Oticon hearing aids and accessories provide high-performance hearing solutions. They manufacture a number of top devices, as well as the essential accessories you need to complement your digital hearing aids.
Shop the full Oticon range here.